麥茲自動化經營品牌 GMI 更多型號請聯系13357889265

2022-02-14

PBCO-D8-011	32 Ch. Board: 32 DI suitable for FBM 217 single connector
PBCO-D16-012	32 AI Ch. Board + Hart connector suitable for TMR 3704 E (Each TMR requires 2 Boards)
PBCO-D16-013	32 DI Ch. Board suitable for TMR 3503E, 3505 E
PBCO-D8-014	8 Ch. Board AO + Hart connector, suitable for TMR 3805E
PBCO-D16-015	32 DI Ch. Board suitable for TMR 3504 A (Each TMR requires 2 Boards)
PBCO-D16-042	32 AI Ch. Board + Hart connector suitable for TMR 3700 A
PBCO-D16-043	32 DI Ch. Board suitable for TMR 3503 E
ABB BOARDS
PBCO-D8-001	Analog Board for 6 Double Analog modules, for A-Loop IOB Card
	suitable for 8 Analog Input and 4 Analog Output channels
PBCO-D8-002	Digital Board for 8 four channel Digital Input modules, for A-Loop IOB & D-Loop IOB Card
	suitable for 32 input channels
PBCO-D12-008	Analog Board for 12 Double Analog modules, for A-Loop IOB Card
	suitable for 16 Analog Input and 8 Analog Output channels
PBCO-D04-038	4 Module / 8 Channels DI Board for ABB TC-200 System
PBCO-D04-039	4 Module / 4 Channels DO Board for ABB TC-200 System
PBCO-D04-040	4 Module / 8 Channels AI Board for ABB TC-200 System with Hart
PBCO-D01-041	1 Hart MUX Module / 32 Channels Board for ABB TC-200 System
PBCO-D08-051	AI Board for 8 Analogue Inputs, for AI 845 Card or for 16 Channel Analogue Inputs
PBCO-D08-052	AO Board for 8 Analogue Outputs, for AO 845 Card or for 16 Channel Analogue Outputs
PBCO-D08-053	DI Board for 16 Digital Inputs, for DI 810 Card or for 32 Channel Digital Inputs
PBCO-D16-025	16+16 AI Ch. Board suitable for Cards AAI 141- 16+16 AI ch. each
PBCO-D16-026	16 + 16 AO Ch. Board suitable for card AAI 543 - 16 +16 AO Ch. each
PBCO-D16-027	32+32 DI Ch. Board suitable for card ADV 151 - 32+32 DI (using 16 four ch. Module)
PBCO-D16-028	32 DO Ch. Board suitable for card ADV 551- 32 DO (16 dual Ch. Module)
PBCO-D08-047	16 AI Ch. Board suitable for Cards SAI 143 16 AI Ch. each
PBCO-D08-048	16 DI Ch. Board suitable for Card SDV 144 - 16 DI Ch. each
PBCO-D08-049	8 DO Ch. Board suitable for card SDV 531 - 8 DO Ch. each
PBCO-D16-021	16 Modules Board for IOP, HLAI, CC, P/N 51304754-150
PBCO-D16-022	16 Modules Board for IOP, A/O, CC, P/N 51309152-175
PBCO-D16-023	16 Modules Board for IOP, DI, CC, P/N 51304485-150
PBCO-D16-024	16 Modules Board for IOP, DO, CC, P/N 513044485-150
PBCO-D8-033	16 AI + 16 AO or 32 DI + Hart connector suitable for DeltaV
PBCO-D16-029	15 AI, Simplex or Redundant Configuration
PBCO-D16-030	16 DI + 16 DO, Simplex or Redundant Configuration
PBCO-D16-031	16 DO, Simplex or Redundant Configuration
PBCO-D8-032	16/32 AI, AO, DI, or DO Board + HART Connector with standard ELCO 56 Pin Out. Connector
PBCO-D16-035	16 AI or 16 AO with standard ELCON 56 Pin Output Connector
PBCO-D16-036	32 AI or 32 AO + HART Connector with 2 standard ELCO 56 Pin Output Connectors
PBCO-D16-037	32 AI or 32 AO + HART Multiplexer Ready with Terminal Block output
PBCO-D8-044	16 Ch (8 Modues) with Terminal Block output
PBCO-D8-050	8/16 + 8/16 AI, AO, DI or DO Board + HART Connector with standard ELCO Out. Connector
Notes	SV = Special Version non stock delivery; NA = Not Available. Size = Width in mm
TB-D5008-GMI-001	N° 8 / 12mm Modules AI-AO-DI-DO Board with ELCO 56 Pin Output + Hart Connectors
TB-D5016-GMI-001	N° 16 / 12mm Modules AI-AO-DI-DO Board with ELCO 56 Pin Output + Hart Connectors
TB-D5208-GMI-001	N° 8 / 22mm Modules AI-AO-DI-DO Board with ELCO 56 Pin Output + Hart Connectors
TB-D5216-GMI-001	N° 16 / 22mm Modules AI-AO-DI-DO Board with ELCO 56 Pin Output + Hart Connectors
TB-D5008F-GMI-001	N° 8+2 (Fault) / 12mm Modules AI-AO-DI-DO Board + with ELCO 56 Pin Output + Hart Connectors
HIMA HI-MAX BOARDS
TB-D5016-HIM-001	N° 16 / 12mm Modules AI-AO-DI-DO Board 16 Channels Master Board with HiMax & Hart Connector
TB-D5016-HIM-002	N° 16 / 12mm Modules AI-AO-DI-DO Board 16 Channels Slave Board with HiMax & Hart Connector
TB-D5216-HIM-001	N° 16 / 22mm Modules AI-AO-DI-DO Board 16 Channels Master Board with HiMax & Hart Connector
TB-D5216-HIM-002	N° 16 / 22mm Modules AI-AO-DI-DO Board 16 Channels Slave Board with HiMax & Hart Connector
TB-D5008-FOX-001	N° 8 / 12mm Modules AI Board for FBM 214 Board
TB-D5008-FOX-002	N° 8 / 12mm Modules AO Board for FBM 215 Board
TB-D5016-FOX-001	N° 16 / 12mm Modules DI Board for FBM 217 Board
TRICONEX TMR BOARDS
TB-D5016-TRX-001	N° 16 / 12mm Modules AI Board for TMR 3720 Board
TB-D5016-TRX-002	N° 16 / 12mm Modules DI Board for TMR 3504E Board
TB-D5016-HON-001	N° 16 / 12mm Modules Board for IOP, HLAI, CC, P/N 51304754-150 Analog Input Type
TB-D5016-HON-002	N° 16 / 12mm Modules Board for IOP, A/O, CC, P/N 51309152-175, Analog Output Type
S.E.I.D. BOARD
TB-D5822-SEID-001	N° 8 / 12mm Modules Board for 16 Channels with Connector Phoenix 14 Pin
TB-OPT-DIN-001	Kit for DIN Rail Mounting for termination board D5000 Series; (1 Piece)
	N° 1 pieces required for 8 positions Termination Boards; N° 2 pieces required for 16 positions TB
TB-OPT-WALL-001	Kit for Wall Mounting for termination board D5000 Series; M4 Threads ( 20 pieces)
	N° 4 pieces required for 8 positions Termination Boards; N° 6 pieces required for 16 positions TB
TB-OPT-WALL-002	Kit for Wall Mounting for termination board D5000 Series; Self Threading (20 Pieces)
	N° 4 pieces required for 8 positions Termination Boards; N° 6 pieces required for 16 positions TB
Notes	NA = Not Available. Size = Width in mm
D2010M	16 Analog-temperature Input channels Intrinsically Safe Multiplexer unit,
	for installation in hazardous Areas, in congiunction with the D2050 unit,
	Din Rail Mounting. 4 D2010 can be connected to a D2050 unit
D2011M	16 Analog-temperature Input channels Intrinsically Safe Multiplexer-Expander unit,
	for installation in hazardous Areas, in congiunction with the D2050 unit,
	Din Rail Mounting, 3 D2011 can be connected to a D2010 unit.
D2030M	32 Digital Input channels Intrinsically Safe Multiplexer unit,
	for installation in hazardous Areas, in congiunction with the D2050 unit,
	Din Rail Mounting, 4 units D2030 can be connected to a D2050 unit
D2050M	Supply Interface unit for redundant comunication with up to 4 D2010-2030 units,
	for installation in Safe Areas, Din Rail Mounting,
	RTU Modbus redundant output line RS485
D2052M	32 Relay Output Module to repeat D2030 input contacts, connection to D2050
D2053M	32 Transistor Output Module to repeat D2030 input contacts, connection to D2050
D2000 Series
D1090Q	4 Channels Shunt Module for mA inputs of D2010 & D2011 Units
D1094Q	4 Channels Shunt Module for V inputs of D2010 & D2011 Units
OPT2091	Cold Junction Compensator to be ordered for THCs Inputs Mounted on Terminal Block
	1 compensator per each D2010M - D2011M units
OPT2094	Wall Mounting KIT for GM 2300 Series Enclosures
OPT2095	Front Door Mounting KIT for GM 2300 Series Enclosures
MOR 016	Din Rail Stopper
MOR 045	Double Terminal Block to anchor CABF008 Line wires & shield
CABF005	15 cm flat cable to interconnect D2010M - D2011M units
CABF006	30 cm flat cable to interconnect D2010M - D2011M units
CABF007	50 cm flat cable to interconnect D2010M - D2011M units
CABF008	Cable to interconnect D2050M with D2010Mor D2030M units (price per meter),
CABF022	15 cm flat cable to interconnect D2050M - D2052M - D2053M units
CABF023	30 cm flat cable to interconnect D2050M - D2052M - D2053M units
CABF024	50 cm flat cable to interconnect D2050M - D2052M - D2053M units
CABF010	Sub D 9 Poles Female-Female Nul-Modem, 1800 mm lenght for RS-232 connection
PPC2094	Optional Kit for System Demo Via RS-485 Modbus & RS-232 Serial Port.
PPC2095	Optional Kit for System Demo Via RS-232 Serial Port only.
SWC2090	Software for configuration available on our web site free of charge
ENCLOSURES
D2000 Series
GM2320-SS-20- -	Stainless Steel Enclosure, For installation of N° 1 D2010M Module.
	Dim.: 400x400x200 mm. With a total of N° 16 M20-DN07 + N° 4 M20-DN1.1 Nichel Plated Brass Cable Glands. Net weight 10,5 Kgs.
	Suitable for N° 1 - D2010M module
GM2320-SS-36- NB-M20	Stainless Steel Enclosure, For installation of N° 1 D2030M Module.
	Dim.: 400x400x200 mm. With a total of N° 32 M20-DN07 + N° 4 M20-DN1.1 Nichel Plated Brass Cable Glands. Net weight 12,0 Kgs.
	Suitable for N° 1 - D2030M module
GM2330-SS-36- NB-M20	Stainless Steel Enclosure, For installation of N° 2 D2010M or N° 1 D2011M & N° 1 D2011M Modules.
	Dim.: 600x400x200 mm. With a total of N° 32 M20-DN07 + N° 4 M20-DN1.1 Nichel Plated Brass Cable Glands. Net weight 17,0 Kgs.
	Suitable for N° 1 - D2030M module or N° 2 - D2010M modules or N° 1 - D2010M + N° 1 D2011M modules
GM2330-SS-52- NB-M20	Stainless Steel Enclosure, For installation of N° 1 D2010M & N° 1 D2030M Modules or N° 1 D2010M & N° 2 D2011M Mod.
	Dim.: 600x400x200 mm. With a total of N° 48 M20-DN07 + N° 4 M20-DN1.1 Nichel Plated Brass Cable Glands. Net weight 20,0 Kgs.
	Suitable for N° 3 - D2010M module or N° 1 - D2010M + N° 2 D2011M modules
GM2330-SS-68- NB-M20	Stainless Steel Enclosure, For installation of N° 4 D2010M / D2011M or N° 2 D2030M Modules.
	Dim.: 600x400x200 mm. With a total of N° 64 M20-DN07 + N° 4 M20-DN1.1 Nichel Plated Brass Cable Glands. Net weight 20,0 Kgs.
	Suitable for N° 2 - D2030M module or N° 4 - D2010M modules or N° 1 - D2010M + N° 3 D2011M modules or N° 2 - D2010M + N° 2 D2011M mod.
Certifications	I= IEC; A= ATEX; R= GOST; UL= Underwriter Laboratories; FM= Factory Mutual; T= TUV; E= Exida; M= Marine; Up to date info: www.gmintsrl.com
Notes	NA = Not Available; NC = Free Size = Width in mm; FF = Enclosures are fitted with: Bottom Plate, DIN Rail, Earthing Bar, Wall Mounting Brackets, Double Terminals Blocks for Redundand Line, Shield connections, DIN Rail Stoppers in Number and Type Specified.

上一條: 麥茲自動化經營品牌 TECNA 更多型號請聯系13357889265

下一條: 麥茲自動化經營品牌 GMI 更多型號請聯系13357889265